Knowledge

Why is the high temperature wire called a high temperature wire? Because this cable is made of high temperature resistance and special production technology, it can be applied to a

The ul wire is the same as other wires. It is mainly used in various electrical lighting circuits, etc., but the quality problem seriously affects the usage. Therefore, as a consum

Low-voltage wiring harnesses and high-voltage wiring harnesses. Automobile low-voltage wiring harness, also known as automobile wire, voltage range: 60-600V, low-voltage wiring har

Power system cables It is reported that wires and cables have become an indispensable part of the modern development of urban economic construction. Many people will include the ty

The wires in the electric vehicle wiring harness have different cross-sectional areas, and the current values allowed to pass through the wires with different cross-sectional areas

Electric vehicle wiring harnesses are divided into main wiring harnesses and branch wiring harnesses, which should be classified according to the system configuration of electric v

Power and motor cables. These two places are the core parts of the electric vehicle wiring harness. Before Haozhi Electronics produces the power wiring harness, the allowable curre

The electric vehicle line is the blood vessel of the electric bicycle. Through this blood vessel, the power of the battery is output to the motor, control system, lighting signal s

1. Observe the roundness of the insulating medium. The cross-section of the standard coaxial cable is very round. The outer conductor of the cable and the aluminum foil are attache

1. Characteristic impedance, the main body of the coaxial cable is composed of inner and outer conductors. There are resistance and inductance for the current flowing in the conduc

According to the location where the coaxial cable is applied, it can be roughly divided into 3 types. 1. Trunk cable: generally thick cables with an outer diameter of insulation of

The structure of the coaxial line is composed of four parts: sheath, outer conductor layer, insulating medium layer and inner conductor. The function of each part is described belo