Sep 01, 2025 Leave a message

What is the difference between A code and B code of M8 connector?

The coding system of M8 connectors (such as Acode, Bcode) prevents accidental insertion through physical keyway design and standardizes pin configurations for different application scenarios:


A code.
Pin configuration: Common 3/4/5 pins, no unified standard (may vary among different manufacturers). ‌‌
Application scenarios: Sensor signals (such as photoelectric switches, proximity switches), IO Link devices, and 24V DC power transmission. ‌‌
Electrical characteristics: Supports low voltage scenarios below 50V AC/60V DC. ‌‌


B code.
Pin configuration: typically 5-pin, compliant with Profibus and Interbus fieldbus specifications. ‌‌
Application scenario: Bus communication in industrial automation control systems (such as automotive manufacturing production lines). ‌‌
Electrical characteristics: Must meet the anti-interference requirements for high-frequency signal transmission. ‌‌

 

info-265-206
Comparison of Physical and Functional Characteristics

 

Protection level: Both reach IP67/IP68, suitable for humid and dusty environments. ‌‌
Mechanical structure: Adopting M8 × 1.0 thread locking, with the same anti vibration performance. ‌‌
Shielding design: Bcode typically requires additional electromagnetic shielding to ensure communication stability. ‌‌

 

Selection suggestions
Prioritize selecting the encoding type based on the device protocol, for example:
Sensor connection or simple power transmission → A code.
Profibus/Interbus system → B code. ‌‌

Send Inquiry

whatsapp

Phone

E-mail

Inquiry