Apr 02, 2022 Leave a message

Control signal rubber power cord

1. Since the control signal rubber power cord is used to control the measurement system, the rubber power cord is required to work safely and reliably;

2. Generally, it is fixedly laid, but the rubber power cord is connected to the equipment.

It is required to be soft and can withstand multiple bends without breaking;

3. The working voltage is 380V and below, and the voltage of the signal rubber power cord is lower;

4. The working current of the signal rubber power cord is generally below 4A. When the control rubber power cord is used as the main equipment circuit, the current is slightly larger, so the cross section can be selected according to the line voltage drop and mechanical properties.

5. Structure

1) The conductor adopts copper core, and the fixed laying adopts a single structure with 7 additional stranded structures; the mobile adopts 5 types of soft conductor structure to meet the softness and bending resistance; 2) The insulation mainly adopts polyethylene, polyvinyl chloride, natural butyl 3) Insulation cores should be reversed into cables to make the structure more stable; for outdoor rubber power cables, nylon ropes are used to fill the cables to increase the tensile strength, while cables in the same direction can increase the softness; 4) Sheath: Mainly used polyvinyl chloride, neoprene and nitrile polyvinyl chloride compound and so on.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry