-
Feb 02, 2026Detailed explanation of RG223 coaxial cable一, Physical characteristics 1. Structure Central conductor: typically solid copper wire with a diameter of approximately 0.81 mm. Insulation layer: usually made of polytetrafluoroe -
Jan 30, 2026What are the Common Issues and Solutions When Using DisplayPort?DisplayPort is a digital display interface standard widely used for connecting devices such as computers, monitors, and projectors. Despite its high-quality video and audio transmi -
Jan 28, 2026What are the material and selection factors of network cable conductors?Ethernet cables are an important component of transmitting data in computer networks, and common types of cables include twisted pair cables (such as Cat5e, Cat6, Cat6a, Cat7, etc. -
Jan 28, 2026What's the RG59 coxial cable construction?RG59 coaxial cable is a common 75 ohm impedance cable mainly used for transmitting video signals. This article will provide a detailed analysis of RG59 coaxial cable. 1, Structure -
Jan 26, 2026What are the application conditions of the shielded lan cable?Shielded twisted pair (STP) is a type of network cable with an additional shielding layer outside the twisted pair, designed to reduce electromagnetic interference (EMI) and radio -
Jan 22, 2026What are the reasons for the substandard speed of the network cable?The problem of inadequate network cable speed is easy to encounter and may be caused by various factors. This article will analyze several common factors. 1, Network cable quality -
Jan 22, 2026Comparison of BNC, Mini BNC, and Micro BNCAs the industry standard for RF and video signal transmission, BNC connectors have evolved into two miniaturized versions, Mini BNC and Micro BNC, with the development of technolog -
Jan 21, 2026What's difference of USB PD2.0, USB PD3.0 and USB PD3.1?What's difference of USB PD2.0, USB PD3.0 and USB PD3.1? Since its initial introduction, USB PD fast charging technology has undergone multiple significant iterations, from PD -
Jan 20, 2026What’s the adhesive Sleeving and Boots inspection criteria in PC/WHMA-A-620?What's the adhesive Sleeving and Boots inspection criteria in PC/WHMA-A-620? Sleeving and boots are common in cable assembly manufacturing, it's a good way to protect the cable and -
Jan 20, 2026What’s the connector damage criteria in IPC/WHMA-A-620?What's the connector damage criteria in IPC/WHMA-A-620? During cable assembly and wire harness manufacturing, connector need to be assembled on the cables. Some times the connector -
Jan 19, 2026What’s the non-adhesive lined Sleeving and Boots inspection criteria in PC/WH...What's the non-adhesive lined Sleeving and Boots inspection criteria in PC/WHMA-A-620? Sleeving and boots are common in cable assembly manufacturing, it's a good way to protect the -
Jan 16, 2026What is the connector strain relief inspection spec in IPC/WHMA-A-620?What is the connector strain relief inspection spec in IPC/WHMA-A-620? Strain relief sleeving (e.g., insulating tape or sleeving or multi-conductor cable outer jacket) used to prev





