1. Scope of application: connection and internal installation lines of power, lighting, electrical installations, instruments and telecommunication equipment with AC rated voltage of 450/750V and below.
2. Laying occasions and methods: indoor open laying and communication channels, along walls in tunnels or overhead laying; outdoor overhead laying, iron pipe or plastic pipe laying, electrical equipment, instrumentation and radio installations are all fixed laying; plastic The sheathed power cord can be laid directly in the soil.
3. General requirements: economical and durable, simple structure.
4. Special requirements:
1) When laying outdoors, due to the influence of sunlight, rain, freezing and other conditions, it is required to be resistant to the atmosphere, especially sunlight aging; there are cold resistance requirements in severe cold areas;
2) In use, it is easy to be damaged by external force or flammable, and it should be put through the pipe in many occasions in contact with oil; when the power cord is put through the pipe, the power cord will be subjected to a large pulling force and may be scratched, so lubricating measures should be taken;
3) When used internally as electrical equipment, when the installation position is small, it should have a certain degree of flexibility, and the color separation of the insulated wire core is required to be clear. It should be matched with the corresponding connector terminals and plugs to make the connection convenient and reliable; for electromagnetic protection requirements. , shielded power cord should be used;
4) For occasions with high ambient temperature, sheathed rubber power cords should be used; for special high-temperature occasions, heat-resistant rubber power cords should be used.
5. Structural composition
1. Conductive power core: When used for internal installation of power, lighting and electrical equipment, copper core is preferred, and compression core should be used for large-section wires; conductors for fixed installation generally use Class 1 or Class 2 conductors structure.
2. Insulation: Insulation materials generally use four kinds of natural styrene-butadiene rubber, polyvinyl chloride, polyethylene, nitrile polyvinyl chloride compound; heat-resistant power cord is made of polyvinyl chloride with a temperature resistance of 90 °C.
3. Sheath: There are generally five kinds of sheath materials, such as PVC, cold-resistant PVC, ant-proof PVC, black polyethylene, and neoprene.
Especially cold-resistant and outdoor overhead laying should use black polyethylene and neoprene sheathed power cords.
In environments with external force, corrosion, humidity, etc., a power cord with a rubber or plastic sheath can be used.





