Knowledge

1. High flame retardancy: Green fully ensures the fire protection requirements of the building's cables, which are not easily ignited by fire and can prevent the spread of flam

Impedance matching of microwave and RF transmission lines is a commonly used technique in microwave and RF systems, aimed at optimizing the effectiveness of signal transmission. Im

When soldering the wires with the terminal, there may have flux residue on the wire or terminals. Top-cable also follow IPC-A-620 spec to control it. Flux residue may be present if

Target - Class 1,2,3 • Insulation sleeving overlaps the connector terminal (at arrows) and extends over the wire insulation four wire diameters (D). • Insulation sleeving

When soldering the wire with the terminals, there is risk to burn or melt the wire insulaiton. How to judge if it acceptable or not? Top-cable strictly follow the IPC-A-620 to cont

PCI-E x1 refers to the PCI Express x1 (PCI-E x1) slot or interface. PCI-E stands for Peripheral Component Interconnect Express, a bus standard used for internal expansion devices i

The PCI-E x16 slot is a computer expansion slot used to connect PCI Express (PCI-E) x16 cards. This type of slot is typically used to install high-performance graphics cards, accel

Tinning is primarily performed to assure that the wire to be soldered has a uniform and readily solderable surface. Tinning of stranded wire has the added benefit of bonding the in

Wire strands separation is a normal defect during wire striping, how to judge it is accept or not, we always follow IPC-A-620 spec. Refer to below Target - Class 1,2,3 • No bi

Wire prepare is important for wire harness manufacturing, it's the first step to make the preparation.IPC-A-620 defind the wire conductor deformation and separation spec in 3.2

IPC-A-620 is widly used in cable manufacturing industry. There are some detail standard for the strands damage during stripping. Top-cable follow IPC spec to manage the wire stripp

The crimping standard for wire harness terminals refers to the specifications and requirements for correctly crimping wire harness terminals to ensure stable and reliable electrica