In the EEPW live broadcast room, Kong Min, the head of Molex's automotive business unit in China, conducted an in-depth interview, which not only revealed the technological strength of this century old American funded enterprise, but also outlined a clear picture of the global automotive electronics industry chain transformation. As the world's second-largest connector manufacturer, Molex's technology sharing not only showcases product iteration, but also reveals the strategic transformation path from a traditional component supplier to an intelligent system solution provider.

In the wave of new energy vehicle architecture reconstruction, Molex's technological reserves have shown multidimensional breakthroughs. Its latest MX large connector system is designed specifically for domain controller architecture, using a modular platform to support 400A current carrying capacity and increasing terminal density by 30% compared to traditional products. This system creatively integrates power supply, signal transmission, and heat dissipation functions, with a stable contact impedance below 0.15m Ω and temperature rise controlled within Δ T ≤ 35 ℃ (ambient temperature of 85 ℃). By introducing hot swappable functional modules, the replacement time of the vehicle's OTA upgrade time-domain controller has been reduced by 70%. This technology has been implemented in mass production on the central computing platform of a leading new energy vehicle company in China.
In the field of high-speed transmission, the differential coaxial connector jointly developed by Molex and Broadcom increases the USB4 protocol bandwidth to 80Gbps, while controlling signal crosstalk below -50dB through multi-layer electromagnetic shielding design. Actual test data shows that the insertion loss of this product in the 15GHz frequency band is only 0.8dB/mm, which is three times more efficient than traditional Fakra connectors. This breakthrough design directly solves the parallel data transmission requirements of 12 8K cameras and 4 LiDAR in intelligent driving systems, compressing the raw data latency to 2.3ms and providing physical layer support for advanced autonomous driving.
The technological innovation of the RNC road noise sensor demonstrates Molex's deep innovation in understanding automotive electronic systems. The sensor adopts a 5 × 5 array MEMS accelerometer, combined with an adaptive Kalman filtering algorithm, which can extract road vibration characteristics in the frequency range of 20-2000Hz within 0.1 seconds. By integrating Fourier transform and deep learning models, the system can automatically identify 17 typical road surface features with a noise reduction accuracy of ± 0.5dB. On the latest electric platform of Great Wall Motors, this system reduces the weight of the entire vehicle by 12kg while reducing the interior noise from 68dB (A) to 62dB (A) at a speed of 120km/h, improving energy efficiency by 2.3%.
The technical team has particularly overcome the electromagnetic interference problem caused by the 48V power supply system and developed a dynamic voltage compensation algorithm to control power supply fluctuations within ± 0.5V. This innovation is not only reflected in the hardware level, but also in its deep integration with the car audio system - by establishing a sound field transfer function model, 256 speaker units form an adaptive cancellation wavefront, which has been successfully verified in the 7.1.4 audio system of NIO ET7.
Faced with the special needs of China's new energy vehicle market, Molex has demonstrated unique technological adaptability. Its 800V high-voltage connector adopts a combination of silver nickel alloy contacts and silicon nitride ceramic insulator, achieving a continuous current carrying capacity of 250A at a contact spacing of 2.3mm. Through innovative dual interlock mechanism design, the contact resistance is stabilized below 0.25m Ω, and the temperature gradient is reduced by 40% compared to industry standards. In the actual test of BYD U8, the connector can still maintain contact stability under the working condition of -40 ℃ to 150 ℃, and the contact impedance change rate is less than 3% after 5000 cycles of plugging and unplugging.
The micro waterproof connector series reflects a deeper understanding of the Chinese market. The 1.2mm pitch connector using laser welding sealing technology achieves 10Gbps data transmission capability under IP69K protection level. This technological breakthrough directly responds to the water wading needs of electric off-road vehicles, keeping more and more new energy vehicles away from water wading risks.
Molex's layout in the field of 6G in vehicle communication demonstrates strategic foresight. The phased array antenna system adopts a 3D-MIMO architecture, with 128 elements supporting adaptive switching in the 24-300GHz frequency band. By using hybrid beamforming technology, the beam pointing accuracy of ± 1.5 ° is maintained even when moving at 120km/h, which is 5 times faster than traditional LTE antennas in tracking speed. In joint testing with China Mobile, the system achieved a peak speed of 10Gbps and a latency of 0.8ms, providing underlying support for vehicle road collaboration.
The breakthrough of intelligent surface technology is even more revolutionary. The antenna hiding scheme using dielectric constant adjustable materials has evolved the traditional shark fin antenna into a panoramic sky integrated system. By using dynamic impedance matching algorithm, the antenna efficiency is maintained at over 85% at different inclinations, successfully solving the signal attenuation problem caused by the dome design of Xiaopeng G6. This technology has applied for 27 core patents and will soon be first installed on the flagship model of Ideal Automobile in 2025.
Faced with the competitive situation in the Chinese market, Molex has built a dual helix innovation system of "global think tank+local agility". The domain control power management system developed under the leadership of its Shanghai R&D center uses topology optimization algorithms to reduce the length of the wiring harness by 40%, and this technology is fed back to global models on the Volkswagen SSP platform. The joint laboratory jointly established with CATL is developing a BMS system based on wireless transmission, which replaces traditional wiring harnesses with 78GHz millimeter wave communication, aiming to reduce the weight of battery packs by 8kg.
In the field of intelligent cockpit, Molex's latest Type-C interface integrates USB4, DP Alt Mode, and 100W PD protocol. Through a self-developed signal integrity simulation platform, the transmission loss is controlled within -3dB. This indicator has increased by 50% compared to industry standards. In the AR-HUD system of Huawei Wenjie M9, parallel transmission of 8K video stream and 60W reverse charging has been successfully achieved, with a plug and unplug lifespan of over 20000 times.
In front of the EEPW live broadcast camera, Kong Min emphasized that "true innovation requires breaking through hardware boundaries and reconstructing value at the system level." The domain control power supply architecture jointly developed by Molex and Horizon is an example - by reducing the power supply network impedance of the Orin chip from 12m Ω to 6m Ω, the peak performance of the chip is improved by 15%. This technology has been included in Nvidia's latest reference design guidelines.
In terms of supply chain security, Molex is deepening its localization strategy in China. The Dongguan production base has achieved the localization of a full range of high-voltage connectors, reducing the delivery cycle from 12 weeks to 4 weeks; The nano injection molding process developed by Wuhan Mold Center has increased the strength of the connector housing by 30% while reducing its weight by 18%. This deep localization capability has set an industry record for delivering 100000 sets of connectors within 72 hours in urgent orders for NIO ET5.
This technical dialogue not only showcases Moenraiks' century long engineering heritage, but also reveals the survival rules of multinational enterprises in the intelligent transformation. As connectors evolve into data vessels and hardware suppliers transform into system architects, this transformation that began with metal contacts is reshaping the entire value coordinate system of automotive electronics. In the technology roadmap presented by Kong Min, a clear industry trend is emerging: the future competition in automotive electronics is no longer a performance competition of single components, but the ultimate competition of cross domain technology integration and ecological construction capabilities.





